Jump to content

Recommended Posts

Posted
I know there's a WIP thread over in the customs section, but let's face it this thread gets way more traffic. So I'd like some feedback as to whether this particular recipe is working for a Wasp figure. The wings are not permanently attached yet, hence the sticky putty showing under her arms a bit. I'm trying to figure out how to get an Avengers "A" on her belt instead of whatever that power rangers crap is. Also, this was the best head I could come up with from my bins, but I think I'm going to have to get that Maria Hill head from OPP because it really is the closest thing I've seen to Wasp - unless anyone else knows of a good one. I don't suppose someone with both a Maria Hill and a PR girl could do a head swap to see if the size of the head is good for that body? I know, alot to ask.

CAP_0096.jpg

Still haven't figured out exactly which color scheme I want to go with either. So this is an extremely rough draft.

Here's another shot beside some of my female SHIELD agents (and a decapitated victim apparently)

CAP_0095.jpg

 

So, any ideas? The basic shape with the skirt seems to work to me. But what changes would you make if you were doing this?

 

Where did you get the wings for that from?

  • Replies 7.9k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted
I know there's a WIP thread over in the customs section, but let's face it this thread gets way more traffic. So I'd like some feedback as to whether this particular recipe is working for a Wasp figure. The wings are not permanently attached yet, hence the sticky putty showing under her arms a bit. I'm trying to figure out how to get an Avengers "A" on her belt instead of whatever that power rangers crap is. Also, this was the best head I could come up with from my bins, but I think I'm going to have to get that Maria Hill head from OPP because it really is the closest thing I've seen to Wasp - unless anyone else knows of a good one. I don't suppose someone with both a Maria Hill and a PR girl could do a head swap to see if the size of the head is good for that body? I know, alot to ask.

CAP_0096.jpg

Still haven't figured out exactly which color scheme I want to go with either. So this is an extremely rough draft.

Here's another shot beside some of my female SHIELD agents (and a decapitated victim apparently)

CAP_0095.jpg

 

So, any ideas? The basic shape with the skirt seems to work to me. But what changes would you make if you were doing this?

 

Where did you get the wings for that from?

Posted

Wasp's potential wings come from a Reddakai figure called Warnet or something like that. IF you find one somewhere it should be clearanced, but they started clearancing those things months ago so they're pretty scarce now. I'm using the body from that same figure to make a demon looking character too and someone else on here used that body for Annihilus (sp?) with legs from another Reddakai figure - looked really good too.

Posted

This is my first venture into webgear/garments. I had always said that I would never do any until I was able to do it how it should be done... the right way. I wanted mine to be ultra-flexable, yet extremely durable also. Here is a trenchcoat I did. It is made from a new material that is both highly durable and flexable. This newmaterial allows for more flexability than even the original. And yes....it has pockets.

Fleshtone is for display only.

 

001-90.jpg

 

Here you can see just how flexable it is. It popped back into shape for these next photos.

002-77.jpg

 

003-90.jpg

 

004-66.jpg

 

 

 

 

Posted
This is my first venture into webgear/garments. I had always said that I would never do any until I was able to do it how it should be done... the right way. I wanted mine to be ultra-flexable, yet extremely durable also. Here is a trenchcoat I did. It is made from a new material that is both highly durable and flexable. This newmaterial allows for more flexability than even the original. And yes....it has pockets.

Fleshtone is for display only.

 

001-90.jpg

 

Here you can see just how flexable it is. It popped back into shape for these next photos.

002-77.jpg

 

003-90.jpg

 

004-66.jpg

 

REALLY COOL ONYX.. REALLY COOL

Posted

Nice work on here!

 

Here is an Azazel I have been working on. Crappy cell pics. Sorry.

 

post-21636-1345951994_thumb.jpg

post-21636-1345952011_thumb.jpg

Posted

Yes, hopefully Onyx will be able to work on those wings this week. But after work on Monday I'll probably have to head to the doctor instead of the post office. I think I might have a cracked rib or two and might need some xrays to confirm or belay my fears.

Good news is that at least my mom's out of the hospital and recovering nicely.

Posted

My daughter (8) loves Avengers now, her favorite of course being Ms. Marvel ("because she looks like mommy"), so, her first "custom" action figure...

 

Ms. Marvel - Avengers Earth's Mightiest Hero's Version

 

MsMarvel.jpg
Posted
My daughter (8) loves Avengers now, her favorite of course being Ms. Marvel ("because she looks like mommy"), so, her first "custom" action figure...

 

Ms. Marvel - Avengers Earth's Mightiest Hero's Version

 

MsMarvel.jpg

 

 

Nice. My daughter loves ms marvel too. She thinks the clasdic with the short hair looks like mommy and i look like captain marvel on superhero squad show.

Posted

i put this in another topic about the movie avenger line, but thought i would share here in case anyone wasnt happy with their current black widow choices.

anyways, its a ROC Baroness body, Scarlet Jo head/hands from the avengers movie line, and the belt and wrist guns are from the MU black widow. no repaints, just easy swaps for beginners.

(in case anyone asks, the base she is standing on is from some kamen rider figures i have...i think kamen rider Forze)

 

post-23930-1346032227_thumb.jpg

Posted
i put this in another topic about the movie avenger line, but thought i would share here in case anyone wasnt happy with their current black widow choices.

anyways, its a ROC Baroness body, Scarlet Jo head/hands from the avengers movie line, and the belt and wrist guns are from the MU black widow. no repaints, just easy swaps for beginners.

(in case anyone asks, the base she is standing on is from some kamen rider figures i have...i think kamen rider Forze)

 

post-23930-1346032227_thumb.jpg

It's hard to tell because the pic is small, but that looks like a really good part swap recipe. Like you said even beginners can handle that one.

 

From what I can tell it looks pretty good.

Posted
CommanderRogers and I are collaborating to get these wings to you guys very soon.

CAP_0096.jpg.

 

you should have said something about those the other day bro, I've got those wings too lol

Posted
i put this in another topic about the movie avenger line, but thought i would share here in case anyone wasnt happy with their current black widow choices.

anyways, its a ROC Baroness body, Scarlet Jo head/hands from the avengers movie line, and the belt and wrist guns are from the MU black widow. no repaints, just easy swaps for beginners.

(in case anyone asks, the base she is standing on is from some kamen rider figures i have...i think kamen rider Forze)

 

post-23930-1346032227_thumb.jpg

 

I like what you did here man.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...







Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE