Jump to content

Broken Ben Reily Spiderman, need help!!


Recommended Posts

well you need to first pull the peg out of the head. if you cant get it out as is - imo the easiest way is get yourself a coffee mug fill about half with plain water, put in the microwave for a couple minutes - just until it is about to boil. put the head in the near boiling water - let it sit for about a minute or so. by then the head should be soft enough to pull the peg out easily. obviously its gonna vbe really hot so - i use a spoon to get it out of the water and i then handle it with a towel. you can let the head sit in the water longer than a minute if it is still too hard to pull the peg out. you are not going to damage the head. i've been doing this for years no problem - just dont microwave the water with the head in the cup!


after you get the peg out you will put the disc side back into the neck of the torso. i would then recommend very carefully using some superglue to keep the torso halves togetherwith the disc/peg in place. just be careful - don';t use a bunch of superglue. if you use too much it may seep into the part where the disc sits and glue it in place keeping you from being able to move it.


thats what i would do


then i would either use the boiling water trick to soften the head before you pull it off the peg next time orsqueeze the neck together when you try to remove the head next time to keep the disc from coming out.


dont worry you havent done anything permanent. i have a couple of figures that are like this - the neck joint didnt seal very well.



Link to comment
Share on other sites

well i would not try to separate the torso halves personally. obvously when you pulled on the head to get it off the ball, the disc part (or wheel) came out of the neck joint because the neck joint was not sealed well at the factory. so since the halves of the neck are already split open - i would attempt to get the disc b;ack in there by working it into the neck -- carefully mind you but , again, i would definitely NOT try separating the torso halves. more work than its worth and it may cause more problems. It isnt going to be easy and may take many attempts. you also might try putting the torso into near boiling water as i described above. that 'might' make the neck halves a little more pliable. the torso and pelvis are not made with pvc , they are made with a type of plastic that is closer to styrene - stiffer and more brittle - so ultimately it is not as flexible as the arms legs and head - which are made of pvc. anyways -- its just something you are gonna have to try, or just break down and get another figure. good luck



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Sign Up For The TNI Newsletter And Have The News Delivered To You!

Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE