Jump to content
Sign in to follow this  
JayC

Marvel Legends 6" MCU Avengers: Infinity War Iron Man And Iron Spider Target 2-Pack Video Review And Images

Recommended Posts

Today I take a look at the brand new Marvel Legends 6" MCU Avengers: Infinity War Iron Man Mark 50 And Iron Spider Target 2-Pack from Hasbro. The Target DPCI# 087-16-0459.
 



Check out images for this set below in our GALLERY and be sure to share your own thoughts about it in the COMMENTS SECTION.

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider01.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider02.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider03.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider04.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider05.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider06.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider07.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider08.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider09.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider10.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider11.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider12.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider13.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider14.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider15.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider16.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider17.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider18.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider19.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider20.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider21.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider22.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider23.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider24.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider25.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider26.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider27.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider28.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider29.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider30.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider31.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider32.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider33.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider34.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider35.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider36.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider37.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider38.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider39.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider40.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider41.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider42.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider43.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider44.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider45.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider46.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider47.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider48.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider49.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider50.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider51.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider52.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider53.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider54.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider55.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider56.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider57.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider58.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider59.jpg

Marvel-Legends-Avengers-Infinity-War-Iron-Man-And-Iron-Spider60.jpg

Share this post


Link to post
Share on other sites

Hello, JC!  Thanks for yet another honest, fair and comprehensive review of Marvel Legends figures!  All of us out here in the "internet ether" appreciate you more than you know!  I apologize for the (potential) inappropriateness of my question here, but I am too ignorant to PM you directly.  And, perhaps, my question will interest other collectors of Marvel Legends figures.  My question concerns stands for six-inch Marvel Legends action figures.  I've tried a few...and none are acceptable.  The peg is always too large or too small.  I've noticed that Hasbro simply uses a hot glue gun when they display their figures at conventions.  This, obviously, is unacceptable to collectors.  Thus, my question: are you aware of a source for stands that work perfectly for most six-inch Marvel Legends figures?  In any event, thanks again for another terrific review!

Share this post


Link to post
Share on other sites

I am just glad that Hasbro actually put some effort and gave Iron man somewhat shinny red instead of this shameful red plastic they used for previous iron man figures. 

Share this post


Link to post
Share on other sites

That shield is not the one Iron Man used against Thanos. It's the one he materializes to block Cull Obsidian's attack before using the drone/blasters combo (happens right after he suits up for the first time), so its size is accurate (though in the movie it had blue accents as well). The cannons are the ones he uses with the drones, they form around his arm instead of taking up the entire gauntlet, so that's what they're smaller than you expected.

Share this post


Link to post
Share on other sites
14 minutes ago, TheMarvelMan said:

Hello, JC!  Thanks for yet another honest, fair and comprehensive review of Marvel Legends figures!  All of us out here in the "internet ether" appreciate you more than you know!  I apologize for the (potential) inappropriateness of my question here, but I am too ignorant to PM you directly.  And, perhaps, my question will interest other collectors of Marvel Legends figures.  My question concerns stands for six-inch Marvel Legends action figures.  I've tried a few...and none are acceptable.  The peg is always too large or too small.  I've noticed that Hasbro simply uses a hot glue gun when they display their figures at conventions.  This, obviously, is unacceptable to collectors.  Thus, my question: are you aware of a source for stands that work perfectly for most six-inch Marvel Legends figures?  In any event, thanks again for another terrific review!

I use the Tamashii Nations Act4 stands. They work ok for my needs. 

Share this post


Link to post
Share on other sites

So Iron Man gets interchangeable hands and Spidey doesn't, what's the big idea?

Share this post


Link to post
Share on other sites
4 minutes ago, leokearon said:

So Iron Man gets interchangeable hands and Spidey doesn't, what's the big idea?

I know! I think it's a missed opportunity. At least they could've given us fists, if you had the original Iron Spider you could swap the twhip hands with the fists.

Share this post


Link to post
Share on other sites
2 minutes ago, memocromatico said:

I know! I think it's a missed opportunity. At least they could've given us fists, if you had the original Iron Spider you could swap the twhip hands with the fists.

That was why I skipped the general release Iron Spider, it had no interchangeable hands and now the 2 packs does the same thing.

Share this post


Link to post
Share on other sites
18 hours ago, ADour said:

That shield is not the one Iron Man used against Thanos. It's the one he materializes to block Cull Obsidian's attack before using the drone/blasters combo (happens right after he suits up for the first time), so its size is accurate (though in the movie it had blue accents as well). The cannons are the ones he uses with the drones, they form around his arm instead of taking up the entire gauntlet, so that's what they're smaller than you expected.

Yeah I noticed that re-watching IW today that the shield is smaller in the NYC battle than when he fights Thanos. I would have preferred the larger version but technically it is fairly accurate to that first one. He also used a more circular looking shield in the NYC battle as well.

IMG_4062.jpg

Share this post


Link to post
Share on other sites
18 hours ago, TheMarvelMan said:

Hello, JC!  Thanks for yet another honest, fair and comprehensive review of Marvel Legends figures!  All of us out here in the "internet ether" appreciate you more than you know!  I apologize for the (potential) inappropriateness of my question here, but I am too ignorant to PM you directly.  And, perhaps, my question will interest other collectors of Marvel Legends figures.  My question concerns stands for six-inch Marvel Legends action figures.  I've tried a few...and none are acceptable.  The peg is always too large or too small.  I've noticed that Hasbro simply uses a hot glue gun when they display their figures at conventions.  This, obviously, is unacceptable to collectors.  Thus, my question: are you aware of a source for stands that work perfectly for most six-inch Marvel Legends figures?  In any event, thanks again for another terrific review!

I don't use figure stands for my Marvel Legends so I don't really know. Hasbro's never made any official ones so you would likely have to resort to customized ones or flight stands. Someone else on here might be able to give you a better recommendation.

Share this post


Link to post
Share on other sites

Just got shipping notice from TRU today that my set has shipped.  If no one answers your question by the time I get it, I'll test it out.  That is actually what I had planned to do anyways.

Share this post


Link to post
Share on other sites
2 hours ago, MCU_Legend_Hunter said:

Does the peter parker head fit on the spiderman from the MJ two pack without looking weird ??

I'll tell you when I get it in september 😛

Share this post


Link to post
Share on other sites
On 7/29/2019 at 6:47 PM, ADour said:

That shield is not the one Iron Man used against Thanos. It's the one he materializes to block Cull Obsidian's attack before using the drone/blasters combo (happens right after he suits up for the first time), so its size is accurate (though in the movie it had blue accents as well). The cannons are the ones he uses with the drones, they form around his arm instead of taking up the entire gauntlet, so that's what they're smaller than you expected.

Yup.  The weapons around his hands are supposed to this one.  So, perhaps it's best to use the fists when using that accessory.

spacer.png

spacer.png

Share this post


Link to post
Share on other sites

I'm still waiting for my pre-order, so I get excited to see pics of it.

Even I already have previous releases of Iron man and Iron Spider man, still I'm happy I will be getting these improved and upgraded versions. I was lucky enough not to get the first Iron man, it didn't have the BAF piece so I just skipped on it. Unfortunately, I had to get the stupid light up feature Iron man in the 10 years three pack.

It would be cool if they added unmasked head of Tony Stark and maybe some additional hands for Spider man as well. Actually, I think this is my only gripe with this two pack.

Share this post


Link to post
Share on other sites
On 7/30/2019 at 5:42 AM, TheMarvelMan said:

Hello, JC!  Thanks for yet another honest, fair and comprehensive review of Marvel Legends figures!  All of us out here in the "internet ether" appreciate you more than you know!  I apologize for the (potential) inappropriateness of my question here, but I am too ignorant to PM you directly.  And, perhaps, my question will interest other collectors of Marvel Legends figures.  My question concerns stands for six-inch Marvel Legends action figures.  I've tried a few...and none are acceptable.  The peg is always too large or too small.  I've noticed that Hasbro simply uses a hot glue gun when they display their figures at conventions.  This, obviously, is unacceptable to collectors.  Thus, my question: are you aware of a source for stands that work perfectly for most six-inch Marvel Legends figures?  In any event, thanks again for another terrific review!

I make my own custom stands from bendy wire.🤓

Share this post


Link to post
Share on other sites
11 hours ago, sharky1999 said:

Yup.  The weapons around his hands are supposed to this one.  So, perhaps it's best to use the fists when using that accessory.

spacer.png

spacer.png

Yeah, I plan to pose this figure with the fisted hands. I feel Hasbro could've done us a solid and include pegholes in the blasters, but I think the space is too narrow so they kinda winged it.

Share this post


Link to post
Share on other sites
On 7/30/2019 at 10:42 AM, MCU_Legend_Hunter said:

Does the peter parker head fit on the spiderman from the MJ two pack without looking weird ??

It looks ok on him, but the hole is too big and the head will just sit on the peg.

20190806_173424-756x1008.jpg

Share this post


Link to post
Share on other sites

I just realized the angle of the picture makes his head look too big, but in person, it does look good.  I should have took the picture from a slightly lower angle.

However, like I mentioned, the head just sits on the peg and does not hold at all.

Share this post


Link to post
Share on other sites

I don't own previous versions of these figures so I may get this plus the accessories are a nice touch. At first, when I saw the Peter Parker headsculpt I didn't liked it that much but now seeing this review I really like it. 

Share this post


Link to post
Share on other sites

I'm happy with this set for the most part. The Iron Spider is cool but the red on it is still too light and the waldoes could've been a little more shiny. Iron Man looks great except for his helmet. The gold part that overlays on the side from the cheek bone aren't supposed to stick out that much and the soldier pads aren't there. But other than that it looks good. I like that the accessories are accurate but it would've been cool to get a couple more from the battle on Titan. All the nano weapons are from the fight between Cull Obsidion and Ebony Maw. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Shop for Marvel Action Figures

  • Topics

  • Posts

    • Since when was Zemo a normal guy? He murdered, and was able to impersonate, a high ranking government official, killed several world leaders while wearing a Bucky mask, set off an EMP device in the middle of a bustling metropolis, broke up the world's premiere superhero organization, memorized the Winter Soldier code book, and located a top-secret Winter Soldier factory, murdering every super-soldier there-in. All while working pretty much alone. In their in-universe estimation he must be like Jason Bourne and Keyser Soze had a baby and hired Dom Toretto as his nanny. They would probably confine his butt to the Raft just to keep the stuff ratting around in his head from getting out.
    • I posted on this idea before. Starjammers would be simple to do; they've already got body molds for all characters ( Abomination makes a great Ch'od and besides, Abomination needs to re-made anyway and scaled up to match the Hulk), and just using the Spider-Man infinite Black Cat mold youve basically got Madame Hepzibah. If they just stick to Dave Cockrum's rendition it'll be perfect.
    • i'll buy that about Clint, being a world renowned assassin and all, but I seriously doubt General Ross was not aware of Scott's association with Hank Pym or familiar with the capability of the Ant-Man formula. If they woulda not know what he was capable of you'd think they woulda put him in some sort of stasis rather than a standard cell under the fear that he could simply just slip through the cracks. I also fully agree that aside from his nefarious machinations Zemo is little more threatening than your average psycho on the streets but, like I said, the Raft just seems like the proper neutral place in the MCU. Granted, we know what the Raft is used for in the Comics Universe, but that doesn't actually mean it has the same application in the much smaller MCU.
    • I've seen it going for around $35 online. If you can manage the extra $10, that might be your most reliable option.
    • Yes! While I have no reason to think any of the Hasbro production heads are reading this, or have any plans to make Red Wolf, I sure hope they take your idea into mind if they do. In fact they need to use lighter, flexible plastic whenever they're doing figures that have tunics that extend below the waist (like Doom) or longer hair ( like Scarlet Witch).


×
×
  • Create New...







Entertainment News International (ENI) is the popular culture network for fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE