Search the Community

Shown below is the new Marvel Studios: The Infinity Saga DLX Iron Man Mark 21 "Midas" figure from threezero. Stay tuned for more details! threezero and Marvel Studios are thrilled to present DLX Iron Man Mark 21 “Midas” as the upcoming figure in the Marvel DLX series. The Mark 21 suit exhibits a gold color with a multi-layer metallic coating process, capturing the image of “Midas,” the king in Greek mythology who can turn everything into gold with his touch. Its golden coloring faithfully replicates the design of Tony Stark’s mighty suit, as seen in the movie. DLX Iron Man Mark 21 “Midas” is a fully articulated collectible figure that stands approximately 6.8” (~17.3cm) tall and is constructed of three zero’s renowned DLX die-cast system with 48 points of articulation. Detailed structural engineering and exquisite design enable the figure to depict various action poses while maintaining a realistic appearance. LED lighting functions are located on the eyes and the arc reactor in the chest. These LED features require four AG1 batteries to operate (not included). The four foldable air flaps on the back can be adjusted to open and close smoothly. Additional accessories include six pairs of interchangeable hands, three pairs of effect parts, one pair of laser beam wrists, three pairs of missile parts, and a DLX action stand. The missile parts can be applied to both hands, legs and shoulders. Laser beam effect parts can be attached with laser beam fists or wrists, providing a wide variety of display possibilities, allowing for replicating different scenes in the movie. Estimated Shipment: 2nd Quarter 2025

Shown below is the new Hono Studio Iron Man 1/6 Scale collectible figure by Hot Toys. Stay tuned for more details! HONŌ STUDIO once again brings back all the nostalgia! Based on the Iron Man comic book series, this Iron Man figure features a newly designed body with seamless silicon arms and knees, arc reactor and repulsor palms with magnetic activated LED light-up feature, together with a comic cover backdrop! This 1/6th scale figure also comes with swappable face masks and detachable countermeasure dispensers, capturing the finest details of Iron Man’s classic look at different eras.

Shown below is the new Avengers Campus Iron Man Mark LXXX 1/6th scale collectible figure by Hot Toys. Stay tuned for more details! Celebrating the kick off of D23, Hot Toys is delighted to unveil the Disney Exclusive version of 1/6th scale Iron Man Mark LXXX diecast collectible figure inspired the Avengers’ Campus Meet & Greet. Exquisitely crafted based on Iron Man in Avengers Campus, the diecast figure features a newly developed helmet with LED-light up function, all new Iron Man armor design and details with red, gold and silver coloring painted carefully with a metallic appearance, LED light-up functions scattered throughout the upper body, back and Arc Reactor on chest, an energy blade, a pair of claw blasters and multiple pairs of interchangeable hands for iconic gestures and weapon-holding, a special Tactical Upgraded Version of Spider-Bot, and a themed figure stand. This Disney Exclusive version includes a shawarma and a blueprint map as bonus items. Avengers Campus 1/6th scale Iron Man Mark LXXX Collectible Figure (Disney Exclusive) will be firstly available at D23 Expo 2024 with limited quantity! Reserve a space for the latest Iron Man that’s built for the ultimate showdown! *Hot Toys Fans, please stay tuned with us and your official Hot Toys local distributor for more announcement updates at other regions.*

Shown below is the new Iron Man 2 Black Widow (Artisan Edition) 1/6th Scale action figure by Hot Toys. Stay tuned for more info! Natasha Romanoff a.k.a. Black Widow, first appeared in the 2010 film “Iron Man 2”, posing as a new assistant for Iron Man while working with S.H.I.E.L.D. She is a skilled spy, assassin, and combat expert one of the founding members of the Avengers team. Scarlett Johansson's portrayal of the character has been widely praised and the character has become a fan favorite in the Marvel universe. As a continuation of the Ultimate Marvel: Summer 2024 reveal, Hot Toys is delighted to introduce the Artisan Edition of 1/6th scale Black Widow collectible figure depicting her debut appearance in Iron Man 2 movie. This exquisitely crafted figure employs an innovative hair implantation technique using wool material, results in a head sculpt that beautifully replicates Black Widow’s refined facial features and her wavy, flowing auburn hair. The 1/6th scale Black Widow figure includes a newly developed head sculpt with separate rolling eyeballs, a meticulously tailored jumpsuit, and an array of accessories that faithfully reproduce her tactical gear from the film. From the signature Black Widow's bite wristlets to her utility belt. The figure even includes a specially designed magnetic figure stand for display. A Special Edition available in selected markets with a limited quantity of 4,000 units will include Iron Man gauntlet and interchangeable hands as bonus accessories; and Non Special Edition without bonus accessory will be available in selected markets with a limited quantity of 2,000 units. Grasp the opportunity to elevate your Marvel collection!

Shown below is the new Iron Man 3 - Iron Man Mark XLII (2.0) 1/6th Scale Action Figure from Hot Toys. Stay tuned for more info. The Iron Man Mark XLII (Mark 42), also known as the "Autonomous Prehensile Propulsion Suit", was the main armor built and used by Tony Stark in the movie Iron Man 3. It is well known for its special ability to fly in separate pieces and wrap itself around Tony's body. Today, Hot Toys is thrilled to present the 1/6th scale Iron Man Mark XLII (2.0) collectible figure showcasing incredible battle damaged details from light scuffs and scratches to heavy, battle-worn details. Meticulously crafted with diecast materials, version 2.0 of 1/6th scale Mark XLII (2.0) figure in metallic gold, red and silver with heavy battle damaged effects faithfully recreated the remarkable armor from the intense combat. Features a newly developed battle damaged Tony Stark head sculpt, an interchangeable LED light up helmet, a specially applied metallic gold, red and silver colors on armor with heavy battle damaged effects, multiple battle damaged armors for alternate look, LED light-up functions on eyes, arc reactor, repulsors that scattered throughout the armor, and a battery booster. The figure also comes with a LED light up themed figure stand. A Special Edition available in selected markets will include an Iron Man helmet as bonus accessory. Iron Man fans should not pass up on this opportunity to add this into your collection!

Shown below are pics from the Hot Toys Exclusive - Iron Man Mark III (Red & Chrome Version) 1/6th Scale Figure. Stay tuned for more info! Tony Stark's iconic Iron Man is undoubtedly one of the most charismatic and celebrated heroes in the Marvel universe, with his unparalleled genius on full display in the legendary Mark III armor first seen in the first Iron Man film. Hot Toys is continuing to expand the Marvel collection with an impressive 1/6th scale Iron Man Mark III (Red & Chrome version) collectible figure, showcasing a new color combination for this suit of armor. It’s an exclusive figure with limited quantity of 3,000 units available only in selected markets. Measures 32.5cm tall, the diecast 1/6th scale figure captures the intricate mechanical complexity of Iron Man Mark III armor. Features a finely crafted Iron Man helmet with LED light up function on eyes, chest, and palms; great range of motion allows for dynamic posing; beautifully crafted armor meticulously painted with metallic red and silver chrome; different forms of interchangeable forearm armors simulating missile firing mode and protection shield mode; and a figure base with LED light up function that perfectly complements the suit's luxurious color scheme. This special chrome version figure will undoubtedly be a true centerpiece for your Marvel display! P.S. Keep your eyes peeled for the latest announcements, because you won't want to miss out on these spectacular releases. The ULTIMATE MARVEL: Summer 2024 celebration is just getting started!

LittleToysBiggerWorld takes a look at the Tech-On Iron Man Avengers Action Figure from S.H.Figuarts. Check out images for this figure below in our GALLERY and be sure to share your own thoughts about it in the COMMENTS SECTION. Pre-order yours from our sponsor: BigBadToyStore.com

Isaac Wong takes a look at the S.H.Figuarts Tech-On Iron Man Figure from SH Figuarts. Check out images for this figure below in our GALLERY and be sure to share your own thoughts about it in the COMMENTS SECTION. Pre-order yours from our sponsor: BigBadToyStore.com

https://www.instagram.com/p/CUgxWCKJapI/?utm_medium=copy_link Beast Kingdom teased a new line with images of a new Iron Man figure. Curious if it's just going to be the Avengers, just Marvel, or if it will expand to other comic company characters that they have a license for. It also teases medieval times as the theme so maybe they all will be made to look like knights? May be Beast Kingdom's version of Tamashii Samurai series where comic and pop culture characters are stylized as living in Japan's feudal era?

Shown below is a first look at the upcoming Avengers: Endgame MAFEX Iron Man Mark 85 figure which looks to come with energy shield, blade, lightning enhancer back piece and arm cannons as well as multiple hands and blast effect pieces. Look for more details and images for this to be released soon by Medicom.

Shown below via LittleToysBiggerWorld are new in-hand images for the S.H. Figuarts Avengers movie Iron Man Mark 6 (Battle Of New York Edition), Captain America (Avengers Assemble Edition) and Thor (Avengers Assemble Edition) figures from Tamashii Nations. You can purchase these figures from our sponsor BigBadToyStore.com.

erivera94 takes a look at the new Marvel Legends 6" Tony Stark AI figure from Hasbro. This figure is part of the Shang-Chi wave which should see full release by 4/25. Check out images for this figure below in our GALLERY and be sure to share your own thoughts about it in the COMMENTS SECTION.

Shown below are new official images for the upcoming MCU Iron Man Mark VII figure coming from overseas company ZDToys. Based on Iron Man from the first Avengers movie, this figure coming with 4 pairs of hands, 4 blast effect pieces and flight stand. These figures stand between 6"-7". Look for this to be released in September 2021.

The appearance of Iron Man in the 1960s did not only introduce a wardrobe of high-tech armored suits to fans, but also maintained a regular presence among the members of Avengers. His hulking gray costume in the early days was later redesigned to an ever-sleeker suit of armor that hewed to a red and gold color theme which is still significant until today. Going back to the origins of our favorite super heroes, Hot Toys is bringing The Origins Collection which takes inspiration from the pages of classic Marvel Comics. To kick of the collection, Hot Toys is pleased to introduce the Iron Man Suit Armor (Deluxe Version) as a diecast 1/6th scale collectible figure with re-imaginated crystal armors, and a specially designed Tony Stark’s Workshop themed diorama base to enhance the collecting experience. Exquisitely crafted based on Iron Man in Marvel Comics, the highly detailed figure features a newly crafted helmet head with LED-light up function; intricate design of the Iron Man armor and structure illustrating its mechanical detail; carefully painted in red and gold coloring with a metallic appearance; crystal clear armor parts, interchangeable mask and armor parts for different styles of display; LED light-up functions scattered throughout the upper body, Arc Reactor on chest and palms; multiple pairs of interchangeable hands for iconic poses. there will be a deluxe version and a regular version released. The deluxe version includes a signature Iron Man suitcase with articulated function, also an elaborated diorama figure base with LED light up function, allowing fans to explore Tony Stark’s high-tech workshop straight from the comic pages, includes articulated gantry arms, extra armor parts, and holographic screen accessories.

Earlier this month Hasbro revealed that they were going to be releasing a 6" Marvel Legends Classic Ultron figure sometime in 2021. They however did not officially reveal how or where the figure would be released. I previously told you in a recent Rumor Report that the figure would be released in an Iron Man themed wave. So besides Ultron, I am sure many of you are wondering what other figures will be released in this wave? Well wonder no more. Based on info I have seen, I'm about to tell you how the wave is likely to break down. AGAIN I MUST STRESS, this HAS NOT been officially confirmed by Hasbro, and should be treated as RUMOR for now. I do however also want to point out my track record has been pretty good on this stuff, including when I told you the figures for the House Of X wave back in October and that MODOK was going to be released as a Deluxe figure for $50 in November. I also want to EMPHASIS that my info only pertains to names. I have not actually seen any of these figures yet, and the images used here are for reference purposes ONLY. The actual specific figures may vary some from the versions shown here. One final note before we get to the names. All indications are this will be a regular release wave as opposed to a Retro one, but I can't say with 100% certainty that it's not a Retro wave. I also have no info on what the Build-A-Figure will be assuming there is one. Ok so now that we have all that out of the way, lets get to the names. - Classic Ultron - Darkstar (Unknown if this will feature her classic look or a more modern one) - Iron Man Modular Armor - Iron Heart - Guardsman (My info was not clear if this will be just a regular classic Guardsman or possibly a more specific version like maybe Curtis Elkins who was part of The Jury. Granted the Sentry version would seemingly be more fitting for a Venom themed wave, but we will have to see.) Hologram - (The assumption is that this will be an Iron Man figure, possibly the more modern Model 68 version.) Iron Man Stealth - (There have been several versions of the Stealth Armor featured in the comics over the years, and I have no idea which specific one the figure will actually be based on. My best guess would be that they will repaint the recent Alex Ross Iron Man figure with stealth colors, but we will have to wait and see.) As for the Build-A-Figure , again I have NO info on it, but I am HOPING for a Dmitri Bukharin as the fifth Crimson Dynamo. Classic Titanium Man would be another cool choice, though we already have that one coming from Diamond Select Toys for the Marvel Select line. So there you have it, the RUMORED Iron Man themed wave for 2021. Let us know what you think about it below in the COMMENTS SECTION, and once Hasbro officially confirms or shows the list to be false, we will be sure to update you all.

Having been mentioned ina couple of other threads. Iron Man could easily have his own wave (or two or three). After all, the Iron Monger wave to tie-in with Iron Mna 3 got me back into MArvel legends. A couple of rules though. Keep it to six or seven figures Since this is an Iron Man wave, there has to be at least two Iron Men armours As well as Iron Man friends and enemeies, Avengers and their foes will be allowed So with those established get suggesting

More MAFEX Marvel reveals from Medicom have surface on social media (Sorry the original source of the images is unknow, if you know feel free to let us know and we will update with a link) from the 2020 Wonder Festival - Winter event, following the reveal of the Spider-Man: Far From Home Night Monkey figure. This time showing us new Avengers: Endgame based figures. Shown are Iron Man, Captain America and an unpainted prototype for a new Fat Warrior Thor figure. Seems like everyone has a version of this Thor coming except Hasbro??? Another MAFEX Marvel reveal that has surface is a X-Men: Age Of Apocalypse Magneto.

Shown below via Tag Hobby are images of the upcoming Marvel Fighting Armor Series of figures from Sentinel. Specifically the Iron Man, Captain America, Deadpool Wolverine and Spider-Man (Iron Spider). Basically these are figures featuring Marvel characters in Iron Man type armors. These where on display at the SEN-TI-DEN event in MongKok, Hong Kong.

‘Midas’ Iron Man Mark XXI, debuted in Iron Man 3, was a fully loaded high-altitude suit created by Tony Stark, activated during the battle against Aldrich Killian when Tony ordered J.A.R.V.I.S to initiate the “House Party Protocol”. Pays great homage to one of Iron Man’s very first costumes, Hot Toys is delighted to unveil today the Iron Man Mark XXI (Midas) in 1/6th scale collectible figure from Iron Man 3 as a Hot Toys Exclusive item. Painted in different shades of metallic gold and silver, the overall appearance of the highly-detailed figure has elevated with additional chrome painting to bring out the finer armor details. The Iron Man figure made in diecast is crafted based on the image of Midas in Iron Man 3, has faithfully reproduced the distinctive design of the suit features a LED-light up helmeted head; LED light-up functions scattered throughout the upper body, back and Arc Reactor on chest; signature armor beautifully painted in mixed shades of gold, silver and bronze color; a variety of interchangeable armors parts, hands of Iron Man’s iconic poses; and a dynamic figure stand with movie logo. This lustrous Iron Man will surely stand out in your House Party Protocol collection! Iron Man 3 1/6th scale Midas (Iron Man Mark XXI) collectible figure is available only in selected markets. Check with your local distributor for details.

Shown below via Anerdydad is a look at the upcoming Street Art Collection Captain America And Iron Man POP! Vinyl figures from Funko that will be released as Gamestop exclusives.

ShartimusPrime takes a look at the new Marvel Legends GamerVerse Stealth Captain America & Atmosphere Armor Iron Man figures from Hasbro. You can purchase these figures from our sponsor BigBadToyStore.com. Check out images for these figures below in our GALLERY and be sure to share your own thoughts about them in the COMMENTS SECTION.

Shown below is a look at the new Iron Man Mark II from the first Iron Man movie and the Mark IV from Iron Man 2. These figures from the overseas company ZDToys stand between 6" - 7" tall and generally have articulation on par with Marvel Legends. Besides doing figures from the more modern MCU movies like Avengers: Endgame, they've already done the Mark III armor and I believe a Mark I and Mark VI version are coming as well from them.

The center of much super activity, the high-tech Stark Industries is now in Fortnite. Explore this esteemed complex to gather loot and maybe even meet a Hero (or Villain)… Click here for more.

Bringing variety and uniqueness to the masterfully crafted figures, Hot Toys steps up efforts to team up with wonderfully talented artists in creating more exceptional collectibles! Introducing a brand new figure from the amazing Artist Collection, Hot Toys’ latest 1/6th scale Venomized Iron Man collectible figure inspired by Marvel’s Spider-Man: Maximum Venom animated series showed exquisite craftsmanship in a different way. In this monumental collaboration, Hot Toys has invited Mr. Khoo Fuk-Lung, a popular and iconic Hong Kong comic artist to create his own distinctive style of Venomized Iron Man. His design offered an extensive insight into the re-imagined character through unique and incredible visual elements, greatly emphasizing the fine details on the Iron Man armor with powerful drawing attentions to the parasitic Venom symbiote; while Hong Kong sculptor Mr. Joseph Tsang has carefully translated the conceptualized design into a realistic collectible with exceptionally fine details. Measuring at approximately 35cm in height, the highly-detailed figure is crafted based on the re-imagined appearance of Venomized Iron Man in Spider-Man: Maximum Venom. It features two newly developed head sculpts with excellent craftsmanship including a half Venom and half Iron Man appearance with LED light-up function, and a Venom head sculpt; two interchangeable long protruding tongues for different expressions; high-structural diecast components and Iron Man armor parts painted in metallic red and gold colors; arms and legs partially crafted with vinyl material, skillfully painted in black with beautiful metallic bluish purple sheen; multiple articulated pincers outstretched from the chest; LED light-up function on Arc Reactor and left palm; as well as matching interchangeable hands specially designed for Venom and Iron Man half. Moreover, a Special Edition available in selected markets will include a symbiote sword that’s interchangeable onto the incredible figure, recreating the times when Venom turns his symbiote into a weapon. Time to get Venomized and show off your love of the symbiote in Marvel with the one-of-a-kind Venomized Iron Man figure! For fans in America, Europe & Middle East, please stay tuned.

Perhaps my favorite look and possibly the most unique looking of the primary suits worn by Tony Stark, is the Silver Centurion Iron Man armor. The darker red and silver colors were a vast departure from the typical gold and red armor normally worn by the character. The suit first appeared back in 1985 in Iron Man #200. Besides looking very different from previous armors in both colors and design, the debut of this armor also marked the long return of Tony Stark as Iron Man. 2 years earlier in Iron Man #169, Stark gave up being Iron Man due to his struggles with alcohol and handed the reins over to his best friend James Rhodes. Rhodes was the man behind the helmet for such major events as the first Secret Wars and became one of the founding members of the West Coast Avengers. Stark had actually created the Silver Centurion armor for Rhodes, but ended up having to don the suit himself after Rhodes was critically injured at the hands of Obadiah Stane and Stan's Iron Monger armor. Stane and the Iron Monger armor of course later appeared in the first Iron Man movie. Stark continued wearing the red and silver armor for around 3 years, in both the Iron Man and West Coast Avengers comics. Eventually the suit was badly damaged in issue #230 at the hands of another armored character known as Firepower. This was during the classic "The Armor Wars" storyline where Stark also took on former ally Steve Rogers, who at the time wore the USAgent costume and was going by the name of The Captain. The shield Rogers used during that time was actually created by Stark and only contained Vibranium. After the events of "The Armor Wars" and his battle with Firepower in issue #230, Stark faked Iron Man's death and created a new armor and persona for the armored Avenger. At the time Stark's identity as Iron Man was a secret. The new armor while pretty cool in design returned to the traditional gold and red colors. Over the years we have gotten a few action figures based on the comic book version of the Silver Centurion armor. Toy Biz gave us a very cool 6" Marvel Legends version, which featured a removable faceplate and a giant rocket space pack that also acted as a display stand. While Hasbro has yet to give us a 6" version, they did give us a 3.75" version in their Iron Man 2 line, and then again in their Marvel Universe line as part of their comic 2-pack assortment. We have also seen variations of the Silver Centurion from the movies and Armored Adventures done as figures, but those weren't comic book accurate. So when will Hasbro give us a modern 6" Marvel Legends figure based on the Silver Centurion armor from the comics? Well if rumors and computer listings are to be believed, the answer should be sometime later this year, likely released as a Walgreens exclusive. Whether this will be a retooled figure based on one of the more recent Iron Man figures Hasbro has released, or a completely new sculpt remains to be seen, but I have high hopes it will look good either way. The Walgreens's exclusive Iron Man 2020 figure is hitting shelves now, and we know Hasbro also has a new War Machine figure slated for release later this year as a deluxe figure. My guess is, we will see the Silver Centurion announced around July with a later in the year release date. Until then check out this cool custom 6" Silver Centurion Iron Man figure done by Lokoboys. Let us know in the COMMENTS SECTION, will a Silver Centurion Iron Man Marvel Legends figure be a must buy purchase for you?