Search the Community
Showing results for tags 'marvel studios'.
Found 14 results
-
Threezero has announced they will be launching a MCU line of figures based on the Infinity Saga for their DXL line. The DXL line up to this point has consisted of high-end Transformers figures that range from 10-11" tall. The DLX Transformers figures have had in the neighborhood of 50 points of articulation, multiple hands, accessories, led lights and figure stands. You can check these out at our sponsor BigBadToyStore.com. No word yet on what Marvel character will be the first to kick off the line, but if I were a betting man I would guess Iron Man. More details for this line will be released in the coming days. -
Upper Deck, known for their high quality and innovative trading cards, is at 2021 Comic-Con Special Edition today, where they’ve “assembled” awesome exclusives for Marvel fans, only available at the convention. You can find Upper Deck at Booth #1532 on the show floor, where you’ll be able to pick up this year’s exclusive, a 2021 Marvel Studios Trading Cards set available for $20 per deck. This set of 15 exclusive trading cards features fan-favorite Marvel Studios properties WandaVision, The Falcon and The Winter Soldier, and Loki. Also Marvel Masterpieces is also showcasing a limited-edition variant print, an offering produced by Upper Deck exclusively for the San Diego Comic-Con Special Edition that will be available at the show for a limited time. The variant print contains a selection of 24 of David Palumbo’s paintings from the Holofoil, Canvas Gallery, and Battle Spectra inserts – which are never before seen prints on bright white archival paper stock. -
According to The Wrap, Marvel Studios is looking for a Latino male actor in his 30s to lead the cast of an untitled Halloween Special that will air on Disney+. This Halloween special will begin production in early 2022 and the sources within say the character may be based on 'Werewolf By Night,' the name of two separate Marvel characters. Jack Russell, the first character starred in the series, 'Werewolf By Night' series that ended in 1977 after 42 issues. The character was created by Gerry Conway and Mike Ploog based on concepts by Stan Lee and Roy Thomas, and first appeared in a 1972 issue of 'Marvel Spotlight.' Russell is a descendant of the mystically altered offshoot of humans known as Lycanthropes, who eventually becomes capable of transforming on his own volition even without a full moon, and retaining his intellect while transformed. The second character, Jake Gomez, appeared last year in 'Werewolf By Night' (Vol. 3) #1. Created by the writing team of Taboo, Benjamin Jackendoff, and Scot Eaton, Gomez, a member of the Hopi Native American tribe whose family has been cursed with lycanthropy, comes in conflict with a nefarious pharmaceutical company exploiting members of the tribe. It's still too early to say which version of 'Werewolf By Night' serves as the backdrop for the TV special. -
Marvel is happy to bring you the latest episode of Marvel Studios’ Assembled: The Making of Loki, which is now streaming at Disney+ The brand new special takes viewers behind-the-scenes of the six-episode Disney+ series, from Loki’s first moments inside the TVA to coming face to face with the man behind it all, He Who Remains — and everything in-between! Hear from stars Tom Hiddleston, Owen Wilson, Sophia Di Martino, and more, along with the creative team behind Loki’s latest adventure, including director Kate Herron and head writer Michael Waldron.
-
Marvel has released an official trailer for Marvel Studios' 'Assembled: The Making of The Falcon and The Winter Soldier.'
-
Go behind the magic of Marvel Studios' WandaVision! Marvel Studios' "Assembled: The Making of WandaVision," an Original Special, is now streaming on Disney+.
-
Now that you've watched the Marvel Cinematic Universe come to life - on both the big and small screen - see how it all initially came together with Marvel Studios' ASSEMBLED. The new comprehensive documentary series of specials goes behind-the-scenes of the shows and movies of the MCU, following the filmmakers, cast and crew, and Marvel heroes every step of the way. ASSEMBLED will take viewers through productions such as WandaVision, The Falcon and The Winter Soldier, and Loki via exclusive on-set footage. Join filmmakers and stars like Scarlett Johansson and Jeremy Renner as they detail the genesis of the Black Widow film, and the Hawkeye series. Arriving on the streaming service shortly after theatrical releases and series completions, ASSEMBLED is an immersive, and in-depth examination of the next phase of the Marvel Cinematic Universe, and will arrive soon on Disney+ The first episode of ASSEMBLED will focus on the critically acclaimed WandaVision. Join Elizabeth Olsen, Paul Bettany and WandaVision's creative team as the episode pulls back the curtain on this highly groundbreaking series. Learn how the production's surprising concept took shape by drawing inspiration from classic sitcoms. Witness how the crew went to great lengths to emulate various filmmaking methods used during the early years of television. Discover the unique challenges and ultimate rewards of performing an entire episode in front of a live studio audience. Spend time with exciting newcomers to the MCU, such as Teyonah Parris and Kathryn Hahn, along with returning favorites like Kat Dennings and Randall Park. Assembled: The Making of WandaVision, premiering on March 12, is an all-encompassing look at Marvel Studios' first, and arguably most unusual, streaming series.
-
Just days after 20th Century Fox released the first trailer for the upcoming X-Men: Dark Phoenix movie, they announced that the movie's release has been pushed from February 14, 2019 to June 7, 2019.. Fox also announced they will be releasing an as-of-yet untitled Deadpool movie this year on December 21, which no one up until now has heard anything about. The chances Fox made a new Deadpool movie without anyone ever catching wind of it is nearly impossible, which has led many to believe this will just be a kid-friendly version of one of the previous 'R' rated Deadpools. Either that or maybe they will release as a feature movie the previously canceled Deadpool animated series that was slated for FX. This week's X-Men trailer was not received well by many fans who long for the day when Disney's Marvel Studios will take over the franchise, but it is unclear if this release date move is a sign that the studio has a lack of faith in the movie or perhaps the opposite. Summer release dates are often herald for those films expected to do well at the box office, but this isn't the first time this movie has been delayed. Originally this film was supposed to open next month in November and was delayed until 2019 so re-shoots could be done. There has been no word any more re-shoots are planned during this delay, but who knows. Fox also announced that the still directorless Gambit movie which would star Channing Tatum has also been delayed again, this time going from June 7, 2019 to March 13, 2020. The Disney/Fox merger is expected to be completed sometime in 2019, at which point Disney will have full control of all these properties and when or if they will actually be released. My guess at that point movies like Gambit and New Mutants will be completely scrapped, and while I have little doubt X-Men: Dark Phoenix will be a train wreck, being the money has already been spent to make it, Disney will likely still opt to release it.
-
Even the most ferocious of Marvel Super Heroes and Super Villains are adorable as Pint Size Heroes. Bringing previously unachievable levels of charm, hi-tech suits and superhuman abilities to any collection, these Pint Size Heroes are available with a 1-in-12 rarity. Captain America, Iron Man, Hulk, Loki, Doctor Strange, Red Skull, Shuri, Thanos, Black Widow, Hela and Thor are ready to battle over the fate of the universe at a shelf near you.
-
Marvel has announced to honor ten years of filmmaking at Marvel Studios, starting August 30 and running through September 6, all twenty films spanning the entire Marvel Cinematic Universe will be returning to theaters for the Marvel Studios – 10th Anniversary Film Festival. Tickets are currently on sale and can purchased from this link. The first five days of the Marvel Studios – 10th Anniversary Film Festival will show all twenty films in release order, followed by two theme days centering around “Origins” and “Team Ups.” Beginning with Marvel Studios’ “Iron Man,” the first film to kick off the Marvel Cinematic Universe, and all the way through this year’s releases of “Black Panther,” “Avengers: Infinity War,” and “Ant-Man and The Wasp,” will playing exclusively in IMAX on select IMAX theatres across the United States and Canada. Three films, “Iron Man,” “The Incredible Hulk,” and “Captain America: The First Avenger” have never been seen in IMAX. The film festival will conclude on the morning of September 6 with two films chosen especially by the fans. Voting is now open and open until August 17. To vote, head over to @IMAX’s official Twitter poll here: https://twitter.com/IMAX/status/1027964271181758464. Marvel Studios’ 10th anniversary begins with the release of “Avengers: Infinity War” and covers an impressive decade of Marvel Studios’ blockbusters released from 2008 through the “Avengers” untitled film in 2019. In celebration of the anniversary, fans can expect exclusive consumer products and collectibles, along with in-theater events and much more in the coming months.
-
Marvel Studios has kicked off the year-long Marvel Cinematic Universe 10-Year anniversary celebration! A numerous number of fantastic productions were released in the past decade that left fans deep impressions, and today Hot Toys is delighted to present the Marvel Studios: The First Ten Years Movbi and Iron Man Mark L Cosbaby (S) Bobble- Head Set to all Cosbaby collectors. The surprising collectible set of two includes Hot Toys’ original character Movbi wears a black baseball cap with a cup of coffee, referencing Kevin Feige in his smart causal style, is enjoying Marvel’s blockbusters throughout the years on the comfy theatre chair! Plus Iron Man Mark L has specially flown all the way to join Movbi for the most epic movie party ever!
-
This custom is currently on eBay ---> http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575003513&toolid=10001&campid=5337381499&customid=&icep_item=161278397392&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg To see more, visit ---> http://www.mintconditioncustom.com/custom-falcon-movie-style/ Hasbro has no plans to make a Marvel Legends scaled movie Falcon figure, so I felt I had to make one myself. This one was pretty time consuming, and I had my moments of self doubt, but I’m glad I pushed myself to finish it to showcase here. The torso is from an ML Bucky Cap, the legs are from a movie Winter Soldier, the arms are from a Punisher, the head is from an ML movie Blade, and the wings are from an X-Men Classics Archangel. I added goggles to the head and it was resculpted and reworked to look more like Anthony Mackie. The shirt pockets came from a NECA Hicks, I used styrene for the zipper, sculpted all the fabric wrinkles in Aves Apoxie Sculpt, and used the harness straps from a Survival Suit Bruce Wayne. The hands come from a movie Nick Fury figure. The back leg armor on Falcon is from an Ultimate Iron Man. The wings were the toughest part. I reshaped the Archangel wings some, and used lots of reference images to get the design right. All the detailing over the wings was done with styrene. Very time consuming. Very frustrating. But something I felt was important to do to get Falcon right. Of course everything was painted accurately to the movie, down to the camo pattern on the pants. Last thing to do was to give him some pistols and a flight stand. And now Falcon is ready to fight alongside Cap to take down Hydra! Thanks for looking! -
This custom is currently on eBay ---> http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575003513&toolid=10001&campid=5337381499&customid=&icep_item=161278397580&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg To see more, visit ---> http://www.mintconditioncustom.com/custom-winter-soldier-movie/ I dig the movie Winter Soldier figure from Hasbro, but felt it could have been improved upon. So I took the masked head that came with the figure and sliced the mask and goggles off, dremeled out the back a lot, cut the goggles off and separated them from the mask, and now you can slip them on and off the unmasked head very easily. They tuck in under his hair, so it holds great. I also removed the eye paint on the unmasked head, added some stubble to the face, and a black wash to his hair. So now there’s four different looks the figure can have. I repainted his torso area black, and then dry brushed a bit of leather over it, which is much more movie accurate than it was before. I also did a general weathering job over the whole figure to make it look more realistic. I attached a knife from a NECA Dutch figure that can be removed easily on the back of the belt. The finishing touch was equiping him with weapons he used in the movie. I gave him a rifle similar to one he used in the film, and also cobbled together a gun that looked like the one in the movie that launched that “magnetic disc bomb” in his initial scene. Now Winter Soldier is ready to take down Cap! Thanks for looking!
